Advertising Banner Systems
Banner Hardware

PATENTED STREETVIEW HOISTING SYSTEM
Available in 30in and 36in Banner Arms

Once installed, there is no need for a bucket truck or a ladder. Change your banners rapidly, frequently and inexpensively.
• Maximizes advertising/communication.
• Reduces drastically the cost of installing/changing banners.
• Increases banner life span.
• Prevents banner vandalism and theft thanks to removable telescopic crank.
• Avoids the need to frequently replace broken brackets.
• Increases safety.

*Crank Handle Sold Seperately*

For banners up to 36" wide and 96" high, and installation up to 25 feet high. Can be installed on lampposts, utility poles and other square or circular poles.

***THIS IS A HEAVY DUTY SYSTEM AND REQUIRES BANDIT STYLE STEEL BAND STRAPS OR THE USE OF U BOLT'S (SOLD SEPERATELY)***

View Streetview Up'N Down Banner System Instructions
(pdf format)

A Patent-Pending Street Banner Installation System
An alternative to the Streetview Up'N Down for lower level street banners

• Change street banners easily and quickly.
• No bucket or ladder needed to install/replace street banners.
• Just use a telescopic pole to lift banners into the brackets from the ground.

For banners up to 30 inches wide, and installation up to 15 feet high. Can be installed on lampposts, utility poles and other square or circular poles.

Banner Arm Lengths Available: 24 inches and 30 inches

An exclusive, patent pending banner installation system using a telescopic pole to lift banner into position. Removes the need for a bucket truck to change banners.

*Telescopic Setter Tool Sold Seperately*

Banner Arm Available: 18 inches, 24 inches, 30 inches, or 36 inches

Streetview Action (Exclusive) Our Unique Patent-Pending Spring-Loaded Banner System
An alternative to standard brackets for longer banner life and constant movement.

• Lowers cost by increasing life expectancy of banners and brackets.
• Reduces wind load on poles and potential liability risk from pole failure.
• Increases impact by creating constant movement which attracts attention.

For banners up to 36 inches wide. Can be installed on lampposts, utility poles and other square or circular poles.

A standard, single banner bracket system. Composed of sturdy aluminum brackets and rigid fiberglass arms

Banner Arms Lengths Available: 18 inches, 24 inches, 30 inches, or 36 inches

The Streetview Single features:
• Sturdy cast aluminum brackets.
• Rigid 1.1/4" diameter fiberglass arms, lighter and stronger than aluminum.
• Aluminum reinforced extremity to safely tighten banner arm in bracket.

For banners up to 36 inches wide. Four banner arm lengths: 18, 24, 30 and 36 inches. Can be installed on lampposts, utility poles and other square or circular poles.

A standard, double banner bracket system. Composed of sturdy aluminum brackets and rigid fiberglass arms.

Banner Arm Lengths Available: 18 inches, 24 inches, 30 inches, or 36 inches

The Streetview Twin features:
• Sturdy cast aluminum brackets.
• Rigid 1.1/4" diameter fiberglass arms, lighter and stronger than aluminum.
• Aluminum reinforced mid-section to safely tighten banner arm in bracket.

For banners up to 36 inches wide. Four banner arm lengths (each side): 18, 24, 30 and 36 inches. Can be installed on lampposts, utility poles and other square or circular poles.