FIBERGLASS FLAGPOLES
This is the only pole manufactured using a hot molded process. This process ensures that the curing is 97% completed when the pole is taken out of the mold after 20-30 minutes.
The gel-coat which has been applied inside the wall of the mold becomes an integral part of the composite. There is no risk of detachment between the composite and the gel-coat. And because the curing has been achieved at 97%, there is only a very minimal evolution of the composite over the life of the pole.
Available Accessories:
(Accessories must be ordered with flagpole purchase) |
Telescoping Fiberglass Flagpoles
The Telescoping Fiberglass Flagpole is a light telescopic flagpole made of a very resistant and flexible fiberglass and resin composite which uses a special woven-roven fiberglass material. The Telescoping Fiberglass Flagpole outside layer is protected by a UV inhibitor finish. The pole is composed of three sections which are secured at the desired height with a unique locking system. Unlike our competitors each pole comes with a 2-foot PVC sleeve, a carrying bag, and two flag unfurling attachments. This pole is in stock and ready to ship.
This pole is portable and works great with banner flags or message flags.
Telescoping Fiberglass Flagpole Accessories:
|
