Internal Halyard Aluminum Flagpoles

Internal Halyard

Our standard selection of internal halyard flagpoles (halyard on the inside of the pole) are available in mounted heights from 20 ft. to 80 ft. with a ground set foundation. Internal halyards are great for commercial applications to prevent flag theft and to reduce noise. There are two different types of Internal halyard flagpoles, the manual cam cleat or the winch operated. Below is our catalog listing of standard flagpoles.

Internal Halyard With Cam Cleat, Standard Flagpoles, Ground Set

• Material: Alloy 6063-T6 aluminum tubing with uniform conical taper
• Finish: Directional sanded satin ground or choose from six other powder coat paint or anodized finishes
• Truck: Cast aluminum single revolving truck assembly with sheave
• Halyard: #10 waterproof braided polypropylene with two, chrome Plated, bronze swivel snap hooks, plastic covered counterweight and beaded sling
• Collar: Spun aluminum flash collar finished to match pole
• Foundation: Ground Set foundation - sleeve fabricated from 16-gauge galvanized corrugated steel tube with a 3/16-inch thick steel base plate and support plate, 3/4-inch diameter x 18 inches long ground spike and steel centering wedges.
• Cam Cleat: Manually operated cam cleat includes a flush-access door with cylinder lock and continuous piano hinge.
• Ball: Gold anodized aluminum

Internal Halyard With Winch, Standard Flagpoles, Ground Set

• Material: Alloy 6063-T6 aluminum tubing with uniform conical taper
• Finish: Directional sanded satin ground or choose from six other powder coat paint or anodized finishes
• Truck: Revolving truck assembly with stainless steel bearing
• Halyard: Stainless steel aircraft cable with two, chrome Plated, bronze swivel snap hooks, plastic covered counterweight and beaded sling
• Collar: Spun aluminum flash collar finished to match pole
• Foundation: Ground Set foundation - sleeve fabricated from 16-gauge galvanized corrugated steel tube with a 3/16-inch thick steel base plate and support plate, 3/4-inch diameter x 18 inches long ground spike and steel centering wedges.
• Winch: A winch is provided inside the pole at 4-6 above ground level to raise and lower the flag by use of a removable hand crank. The winch contains an automatic brake system to permit locking of the flag in any position.