Colossal Steel Flagpole with Internal Stainless Steel Winch System (180' - 600')

COLOSSAL STEEL FLAGPOLE WITH INTERNAL STAINLESS-STEEL WINCH SYSTEM, WHICH INCLUDES THE FOLLOWING:

HEAVY DUTY REVOLVING TRUCK BALL ASSEMBLY WITH 1.25" STAINLESS STEEL SPINDLE, 3/16" STAINLESS STEEL AIRCRAFT CABLE, LOCKING STAINLESS STEEL INTERNAL WINCH W/ REMOVABLE HANDLE, BEADED RETAINER RINGS, COUNTERWEIGHT, 2" STAINLESS STEEL SNAP HOOKS, 3/8" Q-LINKS, AND FLAG ARRANGEMENT. CORRUGATED STEEL FOUNDATION SLEEVE WITH A STEEL BASE PLATE AND LIGHTNING SPIKE ARRESTOR.
TWO COMPONENT CURED EPOXY PRIMER. FINISH OF ALIPHATIC URETHANE GLOSS EPOXY. FLAGPOLE WILL BE SHIPPED PRIMED. TWO COMPONENT FINISH TO BE APPLIED ON JOB SITE.

*AIRPORT JURISDICTION GUIDELINES AND PERMITS ARE THE RESPONSIBILITY OF THE CUSTOMER AND WILL NOT BE PROVIDED BY FLAGPOLES ETC.

INSTALLATION COST FOR THE ABOVE FLAGPOLE BASED ON NORMAL SOIL CONDITIONS.

ANY DEVIATIONS FROM SOIL SAMPLES OR ENGINEERING WITH CHANGE INSTALLATION COST. -

SITE REQUIREMENTS:
THE SITE MUST BE CONCRETE AND CRANE TRUCK ACCESSIBLE. MISS DIG MUST BE CALLED AND MARKED BEFORE INSTALLATION AS IT’S THE CUSTOMER’S RESPONSIBILITY TO SCHEDULE BY CALLING 811 ANY PERMIT & INSPECTION FEES IF REQUIRED ARE THE RESPONSIBILITY OF OTHERS.
I
NSTALLATION LOCATION MUST BE MARKED AIRPORT JURISDICTION GUIDELINES AND PERMITS ARE TO BE COMPLETED PRIOR TO INSTALLATION AND ARE THE RESPONSIBLITY OF OTHERS

INSTALLATION INCLUDES: EXCAVATION, GROUND SLEEVE INSTALL, WELDING, PAINTING OF PRIMED POLE, SETTING OF THE POLE, CRANE FEES, SITE CLEAN UP